Hours (EST): 9am-5pm Mon-Fri
888.244.3263

Oops!

404 - PAGE NOT FOUND

The page you are looking for might have moved or is temporarily unavailable.

Go To Homepage

(!Topic Name="0-home-featured-products-2" !)

We are dedicated to providing our customers with the highest quality products and services in a timely and efficient manner.

Are you looking for:

Hanwei Tinker Pearce Two Hand Sword Blunt Trainer by Paul Chen
The Hanwei Tinker Pearce Two Hand Sword Blunt Trainer by Paul Chen or longsword features nearly identical handling of its sharp companion, but with thick edges (2mm) and a rounded tip for safe sparring practice. Tinker Pearce has developed these matching longswords to satisfy the need of every Western Martial Arts practitioner and sword enthusiast, to have a matching set of sharp and blunt swords for cutting and safe training practice. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 Spring Steel, Marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. The very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection or to exchange blades if needed.

Features

* 5160 Spring Steel
* Marquenched to 50-53 Hrc
* Sharp and Blunt Versions
* Blades are Interchangeable
* Fits Martial Arts and Cutting Needs

Measurements
Overall length: 47 1/4in
Blade length: 35 1/4in
Handle length: 12in
Weight: 2lb 14oz
Point of Balance: 3 1/2in
Point of Percussion: 21 3/4in
Width at Guard: 2 1/4in
Width at Tip: 11/16in
Thickness at Guard: .25in
Thickness at Tip: .07in
Specs will vary slightly from piece to piece.
Hanwei Tinker Pearce Early Medieval Sword Blunt Trainer by Paul Chen
The Hanwei Tinker Pearce Early Medieval Sword Blunt Trainer by Paul Chen is typical of the 13th - 14th century single hand swords but the Type XII blade was known to be in use from as early as the late Viking era. The Blunt trainer is an exceptional match for I.33 sword and buckler study. See item OH2406 for a sharp replacement blade or OH2407 for a blunt replacement blade.

Michael `Tinker` Pearce new line of swords that will satisfy both the sparring and cutting needs of Western Martial Arts practitioners. Matching sharp and blunt versions of each sword in the series offer the same outstanding handling characteristics in both disciplines. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 Spring Steel, Marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. For the Medieval models the very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection, to exchange blades if needed, and for anyone wanting to easily customize their grip. Also the Sharp and Blunt blades are interchangeable on all Medieval models. The grips are cord wrapped and leather covered wood and tapered for a comfortable grip. Each sword is supplied with a leather covered wood scabbard with metal throat and chape.

The weight, balance points and blade harmonics are the same for the sharp or blunt versions of each sword! This means you can easily switch from the blunt trainer to the sharpened sword with no problems.

Features

* 5160 Spring Steel
* Marquenched to 50-53 Hrc
* Sharp and Blunt Versions
* Blades are Interchangeable
* Fits Martial Arts and Cutting Needs

Specifications
* Overall: 38 1/8"
* Blade Length: 31 3/8"
* Handle Length: 6 7/8"
* Weight: 2 lb 8 oz
Hanwei Tinker Pearce Early Medieval Sword Sharp by Paul Chen
The Hanwei Tinker Pearce Early Medieval Sword Sharp by Paul Chen is typical of the 13th - 14th century single hand swords but the Type XII blade was known to be in use from as early as the late Viking era. The Sharp Sword is an exceptional match for the cutting needs of Western Martial Arts practitioner. See item OH2406 for a sharp replacement blade or OH2407 for a blunt replacement blade.

Michael `Tinker` Pearce new line of swords that will satisfy both the sparring and cutting needs of Western Martial Arts practitioners. Matching sharp and blunt versions of each sword in the series offer the same outstanding handling characteristics in both disciplines. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 Spring Steel, Marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. For the Medieval models the very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection, to exchange blades if needed, and for anyone wanting to easily customize their grip. Also the Sharp and Blunt blades are interchangeable on all Medieval models. The grips are cord wrapped and leather covered wood and tapered for a comfortable grip. Each sword is supplied with a leather covered wood scabbard with metal throat and chape. The weight, balance points and blade harmonics are the same for the sharp or blunt versions of each sword! This means you can easily switch from the blunt trainer to the sharpened sword with no problems.

Features
* 5160 Spring Steel
* Marquenched to 50-53 Hrc
* Sharp and Blunt Versions
* Blades are Interchangeable
* Fits Martial Arts and Cutting Needs

Measurements:
Overall: 38 1/2"
Blade Length: 31 3/4"
Handle Length: 6 7/8"
Weight: 2 lb 8 oz
Blade Steel: 5160
Hanwei Tinker Pearce Hand and a Half Bastard Sword Sharp by Paul Chen
The Hanwei Tinker Pearce Hand and a Half Bastard Sword Sharp by Paul Chen also known as a Bastard Sword features a Type XVIIIa blade with a strong central ridge and diamond profile. The tapered oval grip feels exceptional in hand while the second hand easily slides over the wheel pommel when extra leverage is required. The Sharp blade is an exceptional match for the cutting needs of Western Martial Arts practitioner.

The weight, balance points and blade harmonics are the same for the sharp or blunt versions of each sword! This means you can easily switch from the blunt trainer to the sharpened sword with no problems.

Features

* 5160 Spring Steel
* Marquenched to 50-53 Hrc
* Sharp and Blunt Versions
* Blades are Interchangeable
* Fits Martial Arts and Cutting Needs
* Blade Length 33 3/8"
* Overall Length 42 3/4"

Michael `Tinker` Pearce new line of swords that will satisfy both the sparring and cutting needs of Western Martial Arts practitioners. Matching sharp and blunt versions of each sword in the series offer the same outstanding handling characteristics in both disciplines. The swords meet Tinker`s exacting quality requirements and are built in much the same way as his custom pieces. Each blade is forged from 5160 Spring Steel, Marquenched to the desired hardness of 50-53 Hrc while the tang is drawn back to the low 30s Hrc. For the Medieval models the very end of the tang is threaded to fit an allen nut recessed into the pommel which allows for dismantling of the hilt assembly for inspection, to exchange blades if needed, and for anyone wanting to easily customize their grip. Also the Sharp and Blunt blades are interchangeable on all Medieval models. The grips are cord wrapped and leather covered wood and tapered for a comfortable grip. Each sword is supplied with a leather covered wood scabbard with metal throat and chape. See item OH2402 for a sharp replacement blade or OH2403 for blunt replacement blade.
Replica Spare Magazine for German MP40 Replica Submachine Gun

Our MP40 Spare Dummy Magazine is a metal magazine that fits our Reproduction #241111, German World War II Submachine Gun.

Replica gun Sold Separately.

Cannot Ship To:
CT, IL (Chicago, Aurora), KS (Topeka), MN, NJ, NY, PA, PR, RI, WI

Loading...
x
Chat service by BoldChat